Threaded Terminal Inserts through a drill hole in the end post and is secured and adjusted with a washer and nuts (sold separately; see accessories). Use beveled washers (see accessories) for angled stair terminations and flat washers for added bearing surface on wood posts. Typically paired with another Threaded Terminal.

3260	C	1/8"	1/4-20RH	2-1/4"	4-1/4"	7/32"	5/16"
3251	C	1/8"	1/4-20RH	2-3/4"	7-1/2"	7/32"	5/16"
3190	C	1/8"	1/4-28RH	2-1/2"	4-1/2"	7/32"	5/16"
3247	C	1/8"	1/4-28LH	2-1/2"	4-1/2"	7/32"	5/16"
3263	C	3/16"	1/4-20RH	2-5/8"	4-7/8"	9/32"	3/8"
3264	C	3/16"	1/4-20RH	2-7/8"	7-1/2"	9/32"	3/8"
3192	C	3/16"	1/4-28RH	2-1/2"	4-3/4"	9/32"	3/8"
3248	C	3/16"	1/4-28LH	2-1/2"	4-3/4"	9/32"	3/8"

C=CableCrimp™ Hand Swage


DrillØ is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; so, please call our sales department at 1-800-888-2418 to confirm proper hole sizes

To minimize cable deflection, each cable, when properly installed, will have a tension load of at least 300 lbs. Therefore, it's important that frames are designed and built strong enough to support these loads. Review Frame Requirement Detail to help you prepare the railing for cable infill.

We strongly advise against exceeding a 3-inch cable spacing.

We recommend having a post or vertical member (intermediate picket) at least every 3 feet.

Give us a call if you need assistance, 707-731-2581.