Fixed Surface Mount
Attaches to the face of the post using lag screws, bolts, or button head lag screws (sold separately). 130° pivoting allows for easy angled stair terminations. Typically paired with Surface Mount Turnbuckle or Sleekline Surface Mount Turnbuckle.

Fixed Surface Mount
Attaches to the face of the post using lag screws, bolts, or button head lag screws (sold separately). 130° pivoting allows for easy angled stair terminations. Typically paired with Surface Mount Turnbuckle or Sleekline Surface Mount Turnbuckle.

Part#	Swage	CableØ	EØ	H†	W	L
3281	M	1/8"	1/4"	1-3/8"	5/8"	2-1/8"
3284	M	3/16"	1/4"	1-3/8"	5/8"	2-1/4"
3337	M	1/4"	5/16"	1-1/2"	3/4"	3-1/4"
*3333	C	1/8"	1/4"	1-3/8"	5/8"	3"
3334	C	3/16"	1/4"	1-3/8"	5/8"	3"

M=Machine Swage, C=CableCrimp™ Hand Swage

† since flanges are formed pieces, allow a tolerance of ± 1/16" on flange hole span dimension (H)

*#3333 same as #3334 but includes an insert sleeve for crimping onto the 1/8" cable.

To minimize cable deflection, each cable, when properly installed, will have a tension load of at least 300 lbs. Therefore, it's important that frames are designed and built strong enough to support these loads. Review Frame Requirement Detail to help you prepare the railing for cable infill.

We strongly advise against exceeding a 3-inch cable spacing.

We recommend having a post or vertical member (intermediate picket) at least every 3 feet.

Give us a call if you need assistance, 707-731-2581.