 |
 |
 |
|
Fixed Jaw End
Attaches quickly to eyebolts, eyelets, or drilled tabs using a removable
clevis pin. 180° pivoting makes these ideal for stairs and angled
connections. Typically paired with Jaw Turnbuckle. However, it can also be used with other tension adjustment fittings.
| 3288 |
M |
1/8" |
1/4" |
3/4" |
5/16" |
2-7/8" |
5/16" |
| 3331 |
M |
3/16" |
1/4" |
3/4" |
5/16" |
3" |
5/16" |
| 3336 |
M |
1/4" |
5/16" |
1" |
3/8" |
4-1/8" |
3/8" |
| *3279 |
C |
1/8" |
1/4" |
3/4" |
5/16" |
3-3/4" |
5/16" |
| 3280 |
C |
3/16" |
1/4" |
3/4" |
5/16" |
3-3/4" |
5/16" | M=Machine Swage,
C=CableCrimp™ Hand Swage
*#3279 same as #3280 but includes an insert sleeve for crimping onto the 1/8" cable.
Pin DrillØ is the recommended drill hole size for
attaching fittings to eyelets or drilled tabs on the end posts. Drill
hole diameters for the intermediate posts may be different than the
fitting attachment posts; so, please call our sales department at 707-731-2581 to confirm proper hole sizes.
To minimize cable deflection, each cable, when properly installed, will
have a tension load of at least 300 lbs. Therefore, it's important that
frames are designed and built strong enough to support these loads.
Review Frame Requirement Detail to help you prepare the railing for cable infill.
We strongly advise against exceeding a 3-inch cable spacing.
We recommend having a post or vertical member (intermediate picket) at least every 3 feet.
Give us a call if you need assistance, 707-731-2581.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Made from high-strength, low-maintenance, weather-tough, 316-grade stainless steel
Available in 1/8", 3/16", and 1/4" diameter cable to complement any railing design
May be installed on new or existing wood or metal railing frames in exterior, interior, residential, and commercial settings
Complete installation instructions, frame requirements, 3-part specifications, and detail drawings available
Product contains recycled materials
|
|
|
|
|
|
|