1/4" Standard Assembly for Metal Posts 65'
Perfect for all
residential and commercial projects.
Each assembly includes the selected length of 1/4" diameter type 316
stainless steel cable with one pre-attached Threaded Terminal fitting,
one QuickConnect® SS fitting, two Nylon Flat Washers, one stainless steel Snug-Grip
washer nut
Product Specifications |
|---|
| Type | 4-3/4" Terminal (Metal Post) | | Length | 65 ft | Diameter
| 1/4"
| | Package Size | Each | | Material Type | 316 grade stainless steel
| | Included Accessories | Selected length of 1/4" cable with pre-attached Threaded Terminal fitting, (1) Quick-Connect® SS fitting, (2) Nylon Washers and (1) stainless steel Snug-Grip® washer nut
| | Warranty | CableRail 10 Year_ Limited Warranty |
To minimize cable deflection, each cable, when properly installed, will
have a tension load of at least 300 lbs. Therefore, it's important that
frames are designed and built strong enough to support these loads.
Review Frame Requirement Detail to help you prepare the railing for cable infill.
We strongly advise against exceeding a 3-inch cable spacing.
We recommend having a post or vertical member (intermediate picket) at least every 3 feet.
Standard Cable Assembly don't require special
crimpers or tensioning tools. The basic tool list would include:
Electric drill and bits, ViseGrip® pliers, 7/16" wrench for tightening
washer nuts and a cut-off disk for trimming ends.
Give us a call if you need assistance, 707-731-2581.
|