Fixed Button Head
Single piece fitting with non-removeable, low profile rounded head. Fits into a hole drilled through the end post, and the head rests against the outside face of the post. Use beveled washers (#3793), sold separately) for angled stair terminations and flat washers (see accessories) for added bearing surface on wood posts.

Typically paired with another Fixed Button Head plus an In-line Turnbuckle.

Part#	Swage	CableØ	CØ	CT	L	*DrillØ
3287	M	1/8"	7/16"	1/8"	1"	9/32"
3240	M	3/16"	1/2"	3/16"	1-1/8"	3/8"

M=Machine Swage


DrillØ is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; please call our sales department at 707-731-2581 to confirm proper hole sizes.

To minimize cable deflection, each cable, when properly installed, will have a tension load of at least 300 lbs. Therefore, it's important that frames are designed and built strong enough to support these loads. Review Frame Requirement Detail to help you prepare the railing for cable infill.

We strongly advise against exceeding a 3-inch cable spacing.

We recommend having a post or vertical member (intermediate picket) at least every 3 feet.

Give us a call if you need assistance, 707-731-2581.